Urethane Archives - AceTronic Industrial Controls https://www.acetronic.com/resin-recommendation/urethane/ Wed, 23 Oct 2019 17:48:56 +0000 en-CA hourly 1 https://wordpress.org/?v=6.9.4 Universal Mold Release https://www.acetronic.com/product/universal-mold-release-no-42612h/ https://www.acetronic.com/product/universal-mold-release-no-42612h/#respond Thu, 15 Feb 2018 16:11:35 +0000 https://www.acetronic.com/?post_type=product&p=1039 No chlorinated solvents Non-silicone paintable Food-approved lubricant(+++++) Use where parts must be painted, hot-stamped or metalized Colorless Maximum operating temp:  [...]

Read More... from Universal Mold Release

The post Universal Mold Release appeared first on AceTronic Industrial Controls.

]]>
  • No chlorinated solvents
  • Non-silicone paintable
  • Food-approved lubricant(+++++)
  • Use where parts must be painted, hot-stamped or metalized
  • Colorless
  • Maximum operating temp:  600 degrees F / 315 C

    • Universal is just that, a broad universal release that can be used on all thermoplastics, even more sensitive plastics.  Approved as a direct food additive(+++++).  Universal also meets certain requirements for molding medical products – contact us for details.  Universal will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating.

    The post Universal Mold Release appeared first on AceTronic Industrial Controls.

    ]]>     https://www.acetronic.com/product/universal-mold-release-no-42612h/feed/ 0     Heavy Duty Mold Release and Pin Lube https://www.acetronic.com/product/heavy-duty-mold-release-and-pin-lube/ https://www.acetronic.com/product/heavy-duty-mold-release-and-pin-lube/#respond Tue, 13 Feb 2018 20:39:28 +0000 https://www.acetronic.com/?post_type=product&p=1014 No chlorinated solvents Paintable; non-silicone Food-approved lubricant(*****) Dry release minimizes leaching out onto parts Maximum operating temp: 45 degrees F [...]

    Read More... from Heavy Duty Mold Release and Pin Lube

    The post Heavy Duty Mold Release and Pin Lube appeared first on AceTronic Industrial Controls.

    ]]>
  • No chlorinated solvents
  • Paintable; non-silicone
  • Food-approved lubricant(*****)
  • Dry release minimizes leaching out onto parts
  • Maximum operating temp: 45 degrees F /2323 degrees C

    • An ideal lubricant for the front half of ejector pins (pins in forward position), this almost dry lubricant minimzes the possibility of leaching out onto molded parts.   Use in combination with application of Super Grease on back side of ejector pins.  stable at temperatures up to 450 degrees F.  Can be used on plastics, rubber, waxes, glass-filled nylon and similar materials.

    The post Heavy Duty Mold Release and Pin Lube appeared first on AceTronic Industrial Controls.

    ]]>     https://www.acetronic.com/product/heavy-duty-mold-release-and-pin-lube/feed/ 0     Urethane Mold Release https://www.acetronic.com/product/urethane-mold-release/ https://www.acetronic.com/product/urethane-mold-release/#respond Tue, 13 Feb 2018 19:53:41 +0000 https://www.acetronic.com/?post_type=product&p=999 Made especially for polyurethanes Non-paintable silicone Maximum operating temp:  500 degrees F / 260 degrees C Urethane mold release is [...]

    Read More... from Urethane Mold Release

    The post Urethane Mold Release appeared first on AceTronic Industrial Controls.

    ]]>
  • Made especially for polyurethanes
  • Non-paintable silicone
  • Maximum operating temp:  500 degrees F / 260 degrees C

    • Urethane mold release is extremely effective for all polyurethanes: rigid, semi-rigid and flexible urethane foams.  Urethane mold release imparts a light, dry coating on the old, eliminating build-up.  Yet, it is so effective that it continues to work for several cycles between applications.

    The post Urethane Mold Release appeared first on AceTronic Industrial Controls.

    ]]>     https://www.acetronic.com/product/urethane-mold-release/feed/ 0