A light-duty, FDA approved mold release agent and approved for food machinery(++). Economist is non-staining and odorless. Recognized by UL.

A light-duty, non-silicone, paintable, natural, light-duty mold release agent. FDA Approved Lubricant and a direct food additive(+). Biodegradable & odorless.

A light-duty, paintable mold release agent permits post-production part decoration. Paint over it. Plate over it. Hot-stamp over it. Recognized by UL.

A medium-duty, non-silicone, paintable, all-temperature lecithin mold release agent that’s fast-drying on cold and hot molds. FDA-approved lubricant.

A medium-duty, all-temperature paintable mold release agent that’s fast-drying on cold and hot molds. Biodegradable and no chlorinated solvents.

A medium-duty, all-temperature silicone mold release agent that’s fast-drying on cold and hot molds. FDA Approved lubricant. Recognized by UL.

A heavy-duty, paintable mold release agent. Biodegradable & odorless. No crazing or blemishing. Recognized by UL.

A heavy-duty, FDA approved mold release agent that provides faster molding & more production. Approved for food machinery(++). Heat-stable. Non-toxic. Recognized by UL.

A heavy-duty, non-silicone, paintable mold release. FDA approved lubricant. Colorless.

Mold release agent formulated for deep draw molds. More durable bonded formulation. Excellent for most rubber, thermoplastics, phenolic & urethane. Contains PTFE.

A non-silicone, paintable mold release agent. FDA and USDA Approved(+) lubricant. Biodegradable and non-flammable.* Chlorine-free. Colorless, odorless, non-staining.

An FDA and USDA Approved(+++) lubricant, mold release agent. Biodegradable and non-flammable.* Chlorine-free. Colorless and non-staining.

Economical, non-paintable silicone mold release agent. Contains no methylene chloride. Approved for food machinery(++). Recognized by UL.

Economical, paintable mold release agent. No methylene chloride.

Economical, non-silicone, paintable mold release agent. No methylene chloride. Food-approved(*).

Economical, zinc stearate lubricant powder mold release agent. No methylene chloride.

Economical dry film lube mold release agent. No methylene chloride. Contains PTFE.

Silicone Release. No ozone depleting chemicals. Non-chlorinated. No methylene chloride. No chlorofluorocarbons (CFC's). Safe on solvent-sensitive plastics.

Economical, paintable mold release agent. Non-chlorinated. No methylene chloride. Safe on solvent-sensitive plastics.

A non-silicone, paintable mold release agent ideal for plastic electronic parts.

An ideal lubricant for the front half of ejector pins (pins in forward position,) this almost dry lubricant minimizes the possibility of leaching out onto molded parts.

Contains boron nitride for molding at temperatures up to 1800F. Excellent for die-casting metals.

A non-silicone, paintable mold release for thermoplastic and rubber compounds. Approved for indiret food contact.

A non-silicone, paintable mold release agent that neutralizes corrosive vapors. Prevents deposit build-up.

A non-silicone, paintable, all-purpose mold release agent. Neutral white-oil-based release contains no lecithins. USDA rated H1. Recognized by UL.

A non-silicone, paintable mold release agent. Permits ultrasonic welding of parts. No removal necessary, simply wash parts in H2O. Does not contain water.

A non-silicone, paintable mold release agent. Lubricant powder. For polycarbonates, polypropylenes, polysulfones and rubber molding.

Semi-permanent mold release agent for thermosets. Excellent rotational mold release. Use for urethane & epoxy molding. Completely dry, paintable and non-flammable.

Non-silicone mold release agent for thermosets. For epoxy, polyester and phenolic molding, injection molding, encapsulating, potting.

Mold release agent made with synthetic carnauba wax. Contains no silicones or oils.

Non-paintable silicone mold release mold release agent for rigid, semi-rigid and flexible urethane foams. Made especially for polyurethanes. Non-toxic. No chlorinated solvents.

Formulated to protect plastic molding dies while in storage from corrosive attack by hydrochloric and hydrobromic acids plus protects molds from most common corrosive damage that is found in the atmosphere.

Rust preventive and inhibitor has blue tracing color. Provides up to 3-year protection indoors. Does not have to be removed before using molding dies.

New ultra-dry formula delivers a dry mist which will not penetrate into moving parts. Self-cleaning at startup. Non-silicone and non-wax formulation.

New ultra-dry formula delivers a dry mist which will not penetrate into moving parts. Self-cleaning at startup. Non-silicone and non-wax formulation.

The one-step rust preventive that contains both neutralizer and rust preventive. Ideal for plastic mold protection. Protects up to five years under normal conditions.

Non-silicone PTE-base formulation penetrates and frees frozen parts. Lifts and replaces moisture with protective film. Protects up to six months under normal conditions.

Dry formula makes oils stay where they are sprayed. No trichlorethylene. Fast clean up. Two years protection under normal conditions.

White lithium NLGI Grade #2 grease. No methylene chloride. Ideal for knock-out pins. Can be used on all moving parts. Water resistant and protects against corrosion.

An ideal lubricant for the front half of ejector pins (pins in forward position,) this almost dry lubricant minimizes the possibility of leaching out onto molded parts.

Silicone Emulsion

FDA approved, USDA listed H1 lubricant grease with operating temperatures from -45F to +650F. Clear, clean, non-yellowing grease. NLG#2. Excellent dielectric.

NSF H-1 lubricant grease with operating temperatures from -45F to +650F. Clear, clean, non-yellowing grease. NLG#2. Excellent dielectric.

Purging compound requires no mixing or preparation time. Shortens purge cycle time. Eliminates need for multiple purging products. Removes all traces of barrel residue.

Liquid purging compound works with carrier for effective resin to resin and color to color changes. Purge quickly at a fraction of the cost of conventional purges.

A general purpose, pressure sensitive adhesive. Use it on paper, cardboard, cloth, foil, Mylar and acetate sheet, glass, leather, foam rubber, urethane foam and many plastics.*

Bare Metal is ideal for metal fabricators, tool and die operations, and anyone who needs to clean metal. It removes grease, oil, wax, tar and other contaminants on tools, motors, bearings, generators, control panels, power tools and more.

General purpose oil to provide faster, easier drilling, cutting, sawing, threading, tapping and general machining. High pressure additives.

The one-step rust preventive that contains both neutralizer and rust preventive. Ideal for plastic mold protection. Protects up to five years under normal conditions.

Non-silicone PTE-base formulation penetrates and frees frozen parts. Lifts and replaces moisture with protective film. Protects up to six months under normal conditions.

Plastic Cleaner uses FOAMACTION(TM) foaming spray to effectively remove oil and dirt marks from all plastics, even sensitive polycarbonates. Just spray and wipe clean, then polish with a clean, dry cloth.

Silicone lubricant made with FDA approved silicone. An all-around general purpose lubricant for use on all kinds of machinery.

FDA approved, USDA listed H1 lubricant grease with operating temperatures from -45F to +650F. Clear, clean, non-yellowing grease. NLG#2. Excellent dielectric.

NSF H-1 lubricant grease with operating temperatures from -45F to +650F. Clear, clean, non-yellowing grease. NLG#2. Excellent dielectric.

Biodegradable, chlorine-free tapping fluid produces cleaner threads. Made with natural oils.

Mold and contact cleaner will not harm rubber or paint. Can be used on operating electrical equipment, leaving no residue.

A complete spraying system to work with your compressed air. It includes an Air-O-Spra hand unit, 10 foot braided hose, 12 oz. Plastic bottle and 1/4

Variable rate tips and valves to be used with Slide Charge-It and Hand Held sprayer.

Refillable, rechargeable tank can be filled with liquid product and charged with compressed air.

Automatic spray unit is easy to program and works autonomously from all your equipment. Proximity sensor signals unit to deliver release to any point.

Handheld sprayer for dispensing equipment designed to be used with Slide cylinder products.

Plastic bottle and sprayer to be used with Slide bulk products.