SUNX Slim & Microscopic Inductive
Proxy Sensors (Amplifier-seperate Type)
 |
GA-10 / GH Series
Amplifier-separated Micro-size Inductive Proximity Sensor
|
Contact
us for Technical and Sales informations.
GH-2S sensor with only 2.8 mm one of the smallest proxy sensors in the market
and GA-14 external amplifier with only 10 mm width, DIN rail mountable, is
one of the slimest amplifiers with high accuracy and reliablity. Please refer
to Data sheet.
SCAN Inductive Proximity Sensors
SCAN sensors are available in various housings, electrical
and mechanical specification and are certified to ISO 9001 /DNV of The Neatherlands.
The following types of Inductive Proximity sensors are available:
-
DC Inductive
Proximity Switch
-
DC Long Sensing Proximity Switch
-
AC Inductive Proximity Switch
-
AC/DC, N.O.-N.C. changable
proximity Switch
-
NAMUR Inductive Proximity Switch
-
5-Way Rotatable Inductive Proximity
Switch
|
|
Contact us for
Technical and Sales informations.
Capacitive proximity sensors consist of an RC-oscillator with
a special multi-part sensing electrode. The electrode and the oscillator circuit
have a tube connected with earth potential for lateral shielding. This enables
flush mounting of the sensor in metal, since the electrical field is only
present in front of the sensing electrode. This field is the active zone of
the sensor.
When the conductive material is removed from the active zone, the oscillator
is undamped and the oscillation amplitude decreases. The amplifier of the
oscillator voltage and the sensitivity of the sensor can be altered by the
built-in potentiometer.
The middle electrode together with the built-in re-coupling give very effective
compensation under conditions of humidity, dust or icing. Special circuitry
automatically compensates for these influences.
The preset sensing distance remains nearly constant. The electrode
design, along with the compensating circuirt of capacitive sensors, form a
unique design, and provide performance advantages far superior to other capacitive
sensors.
CARLO GAVAZZI Capacitive Proximity Sensors
- (Many additional types available but not listed)
 |
DR3
DR6
|
• Thermoplastic
polyester housing cylindrical
• Diameter: Ø 11, Ø 22
• Sensing distance: 3 to 5 mm
• Output: Namur (DIN 19 234)
• 2 m cable
|
 |
EC3025PPAML-1
|
• Nickel plated brass
housing
• Adjustable sensing distance 4-25 mm
• Rated operational voltage: 10-40 VDC
• Output: DC 200 mA, NPN or PNP
• LED indication |
Contact
us for Technical and Sales informations.
SCAN Capacitive Proximity Sensors
The following types of Capacitive Proximity sensors are available:
-
DC Capacitive Proximity Switch
-
DC Capacitive Proximity Switch-requiring
Amplifier
-
AC Capacitive Proximity Switch
-
NAMUR Capacitive Proximity Switch
-
5-Way Rotatable Capacitive Proximity Switch
|
|
Other Capacitive Sensors / Controllers
/ Amplifiers (Inductive & Capacitive):
-
Mini Capacitive Controller Unit & Amplifier
-
NAMUR Amplifiers
-
Analog Sensors (Inductive & Capacitive)
-
Speed Controller & Detector
-
5-Way Rotatable Sensors
Contact us for
Technical and Sales informations. |
|
Photoelectric switches can be divided into four groups according
to their functions. These four groups are through-beam switches, retro-reflective
switches, diffuse switches, and fiber-optics with amplifiers. Photoelectric
switches are used to detect various material at long ranges by non-contact
sensing and are manufactured to the highest specifications and quality.
Photoelectric switches make use of physical properties typical of ligh-sensitive
elements. They change their electrical features based on the ligh intensity
in which they come in contact. Their working principle is based on the fact
that a light beam (with a wavelength within the infrared spectrum), emitted
at the right moment by a light emitter (LED or IRED), is reflected back to
a receiver (usually a phototransistor) by the object to be sensed. The light
intensity variation striking the receiver depends upon the presence or absence
of the object to be detected (target) and changes the electrical state in
the receiver element. The signal is sent to a threshold amplifier with hysteresis
which assures switching without failure and successfully allows the final
amplifying stage capable of driving an external load.
 |
SCAN Photoelectric Sensors
-
Miniature-Beam Series PhotoElectric Sensor
-
Economy-Beam Series PhotoElectric Sensor
-
Cylindrical M12/18 PhotoElectric Sensor
-
RP74 Series PhotoElectric Sensor
|
 |
Contact us for
Technical and Sales informations.
CARLO GAVAZZI Photoelectric Sensors -
(Many additional types available but not listed)
 |
|
• Heavy duty M1 8
metal housing, IP 67
• Range: 3 m
• Rated operational voltage: 10 to 40 VDC or 20 to 250 VAC
• Output: DC 200 mA NPN or PNP, AC 500 mA SCR
• LED output indication
• Operating frequency 120 Hz (DC), 20 Hz (AC)
• High immunity to ambient light
• Cable and plug versions |
 |
|
• High quality reflectors for retro-reflective
photoelectric switches
• Reflective tape suitable for polarized light
• Heated reflectors for cold storage or freezer installations
• All catalogued photoelectrics use ER 4 as reference for applicable
sensing distance |
 |
|
• Heavy duty M 18
metal housing, IP 67
• Range: 10 to 400 mm
• Rated operational voltage: 10 to 40 VDC or 20 to 250 VAC
• Output: DC 200 mA NPN or PNP, AC 500 mA SCR
• Make and break switching function, LED indication
• Operating frequency 120 Hz (DC), 20 Hz (AC)
• High immunity to ambient light
• Cable and plug versions |
Contact
us for Technical and Sales informations.
SUNX Photoelectric Sensors -
(Many additional types available but not listed)
 |
RELIABILITY
|
|
|
QUALITY
|
 |
COMPETETIVE
|
 |
SUPPORT
|
|
Contact
us for Technical and Sales informations.
Level Sensors are used to measure the level of a liquid in
a container. There are diffrent level detection technics such as Conductive,
Capacitive, Optical and the old Mechanical way.
CARLO GAVAZZI Level Sensors - Conductive
Type - (Many additional types available but not
listed)
 |
|
• 1 to 4 electrodes
• Isolated or unisolated electrodes
• Cable or screw connection
• 1/2”, 1” or 1 1/2” pipe thread |
 |
|
• Excellent resistance to chemicals
• Teflon housing
• 1 to 4 electrodes
• Isolated (teflon) or unisolated electrodes
• Cable connection
• 1 1/2” pipe thread |
 |
|
• Food and beverage usage
• 2 Teflon isolated electrodes
• For welding in container
• Screw connection |
 |
|
• VH1 and VH2: Hanging electrodes with
Neoprene cable
• A94-10: Hanging probe for (swimming) pool level
control |
Contact
us for Technical and Sales informations.
CARLO GAVAZZI Level Sensors - Capacitive
Type - (Many additional types available but not
listed)
 |
|
• Level sensor for pools
• 3 mm sensing distance
• For wall mounting |
 |
|
• Capacitive level sensor for solid,
fluid or granulated substances
• Adjustable sensing distance: 4-12 mm
• VC11/12RT: With adjustable time delay
• VC12RN: Without time delay |
Contact
us for Technical and Sales informations.
CARLO GAVAZZI Level Sensors - Optical
Type - (Many additional types available but not
listed)
 |
|
• Unmodulated infrared sensor for liquid
level detection
• Approved for Ex-applications (DC-types)
• Built-in amplifier, Ga-As diode
• Output: Transistor NPN/PNP or SCR, make or break switching
• High chemical resistance to most acids and bases
• VP01/03: Output OFF when sensor in liquid
• VP02/04: Output ON when sensor in liquid
• No electrical or thermal connection between liquid & electrical
circuit
• Power supply: DC types: 10 to 40 VDC AC types: 110 or 230V |
 |
VP series
Modulated light
|
• Modulated light
• Built-in amplifier
• Output: NPN or PNP, 4-wire (NO & NC)
• Housing: Stainless steel or nickel plated brass
• Tip: Polysulphone or glass
• High chemical resistance to most acids and bases
• Liquid and electrical circuit completely isolated
• Power supply: DC models 10 to 40 VDC |
Contact
us for Technical and Sales informations.
CARLO GAVAZZI Level Sensors - Electromechanical
Float Type Switch (Horz./Vert.)
| N/A |
FS series
Data sheet (pdf N/A)
Please call for hard copy
|
• Float Switches for liquid level sensing
• Maximum switching voltage:200 VDC or 240 VAC , 0.5A SPST |
Contact
us for Technical and Sales informations.
CARLO GAVAZZI Fiberoptic Sensors -
(Many additional types available but not listed)
 |
|
• Range: Fiber dependent, typ. 100 mm
• Adjustable sensitivity
• Modulated, red light
• Rated operational voltage: 10 to 40 VDC
• Output: DC 200 mA NPN or PNP
• Make and break switching function, LED indication
• Heavy duty M 18 metal housing, IP 67
• Cable and plug versions
• For 2.2 mm fiber cable with 1 mm core |
Contact
us for Technical and Sales informations.
Home | Products
| Contact Info
© 2002-2003 All Rights
Reserved, AceTRONIC Industrial Controls Inc.
Last revised: Dec.
2003
