Solid State Relays

Carlo Gavazzi Solid State Relays

To Carlo Gavazzi SSR page

Continental Industries International

SSRs - I/O Modules - Accessories

SS Series & SV Series (NEW)
10-75 Amp, 330 & 660 VAC Output, DC/AC Input, LED Indicator, Safety Cover
RSDC Series
8-40 Amp, 100 VDC Output, DC/AC Input & Output

RLDA Series ***
15 Amp, 280 VAC Output Fast-ON Terminals AC/DC Input

*** Note: RLDA Discontinued -- Please contact us for substitute.

Solid State Relay - SS Family :

Application Note: High Amperage Applications. It is recommended to use SV series for New Applications

Features: Optically isolated LED status indicator Clear safety cover included 600 volt blocking voltage 4000 volt isolation Zero voltage turn-on Built-in snubber High surge capability 100% tested at rated current U.L. recognized C.S.A. Certified CE compliance

Input: 4 to 28 VDC	Units	SSDA- 330-10-000	SSDA- 330-25-000	SSDA- 330-40-000	SSDA- 330-75-000
Schematic Number	.0	1	1	2	2
Impedance (Rc)	Ohm	1500	1500	1500	1500
Turn-on Voltage (Min.)	VDC	4	4	4	4
Turn-off Voltage (Max.)	VDC	1	1	1	1
Reverse Voltage Protection	VDC	-75	-75	-75	-75


Input: 90 to 280 VAC	Units	SSAA- 330-10-000	SSAA- 330-25-000	SSAA- 330-40-000	SSAA- 330-75-000
Schematic Number	.0	3	3	4	4
Impedance (Rc)	KOhm	.40	40	40	40
Turn-on Voltage (Min.)	VAC/DC	100	100	100	100
Turnoff Voltage (Max.)	VAC/DC	20	20	20	20
Reverse Voltage Protection	.0	N/A	N/A	N/A	N/A

Output: (For All Models)
I_OUT(Continuous w/proper heatsink)	A_RMS	10	25	40	75
Voltage Drop @ I_OUT	VAC	1.65	1.65	1.5	1.5
I_SURGE- 1 Cycle Non-repetitive	A_PEAK	100	250	650	950
I_SURGE- 1 Second Non-repetitive	A_PEAK	40	100	130	140
Voltage Range (V_OUT)	VAC	24-330	24-330	24-330	24-330
Over Voltage Rating	PIV	600	600	600	600
Frequency Range	Hz	47-63	47-63	47-63	47-63
Leakage @ V_OUT(max.)	mA	8	8	8	8
Turn-on (max.)	0	1/2 Hz	1/2 Hz	1/2 Hz	1/2 Hz
Turnoff (max.)	0	1/2 Hz	1/2 Hz	1/2 Hz	1/2 Hz
Holding current (min.)	ma	50	50	50	50
Zero voltage switching	0	Yes	Yes	Yes	Yes
Dv/Dt @ V_OUT(max.)	Vus	200	200	500	500
Commutating Dv/Dt Snubbed for Power Factor.=	0	.5	.5	.5	.5
I²T Fusing (8.3 ms.)	A²S	35	260	1035	3745
Thermal resistance R_0JC(Tj=115^oC)	⁰C/W	1.48	1.05	.65	.30

General Characteristics:
Dielectric strength (Input-Output-Base)	V_RMS	4000	4000	4000	4000
Capacitance Input to Output	pf	3	3	3	3
Ambient temp. range (Operating)	⁰C	-40 to +100	-40 to +100	-40 to +100	-40 to +100

SV Family (New):

Application Note: Recommended for all new applications. Now available with Superior Surge Survival™

Features: Optically isolated LED status indicator Clear safety cover included 800 volt blocking voltage (3V models) 1200 volt blocking voltage (6V models) 4000 volt isolation Zero voltage turn-on Improved built-in snubber High surge capability 100% tested at rated current U.L. recognized C.S.A. certified CE compliance

Input: 4 to 32 VDC	Units	SVDA/ 3V10	SVDA/ 3V25	SVDA/- 3V50	SVDA/- 3V75	SVDA/- 6V50	SVDA/- 6V75
Schematic Number	.0	1	1	1	1	1	1
Impedance (Rc)	Ohm	1500	1500	1500	1500	1500	1500
Turn-on Voltage (Min.)	VDC	4V@5.4mA	4V@5.4mA	4V@3.5mA	4V@3.5mA	4V@3.5mA	4V@3.5mA
Turn-on Voltage (Max.)	VDC	32V@10mA Max (current limited)	32V@10mA Max (current limited)	32V@6.5mA Max (current limited)	32V@6.5mA Max (current limited)	32V@6.5mA Max (current limited)	32V@6.5mA Max (current limited)
Turn-off Voltage (Max.)	VDC	1	1	1	1	1	1
Reverse Voltage Protection	VDC	-75	-75	-75	-75	-75	-75

Input: 100 to 280 VAC	(Model)->	SVAA/ 3V10	SVAA/ 3V25	SVAA/ 3V50	SVAA/ 3V75	SVAA/ 6V50	SVAA/ 6V75
Schematic Number	.0	2	2	2	2	2	2
Impedance (Rc)	KOhm	.20	20	20	20	20	20
Turn-on Voltage (Min.)	VAC	100	100	100	100	100	100
Turn-off Voltage (Max.)	VAC	20	20	20	20	20	20
Reverse Voltage Protection	.0	N/A	N/A	N/A	N/A	N/A	N/A

Output: (For All Models)
I_OUT(Continuous w/proper heatsink)	A_RMS	10	25	50	75	50	75
Voltage Drop @ I_OUT	VAC	1.1	1.2	1.3	1.1	1.3	1.1
I_SURGE- 1 Cycle Non-repetitive	A_PEAK	100	250	650	950	650	950
I_SURGE- 1 Second Non-repetitive	A_PEAK	40	100	130	140	130	140
Voltage Range (V_OUT)	VAC	24-330	24-330	24-330	24-330	24-600	24-600
Over Voltage Rating	PIV	600	600	600	600	600	600
Frequency Range	Hz	47-63	47-63	47-63	47-63	47-63	47-63
Leakage @ V_OUT(max.)	mA	8	8	8	8	8	8
Turn-on (max.)	0	1/2 Hz	1/2 Hz	1/2 Hz	1/2 Hz	1/2 Hz	1/2 Hz
Turn-off (max.)	0	1/2 Hz	1/2 Hz	1/2 Hz	1/2 Hz	1/2 Hz	1/2 Hz
Holding current (min.)	mA	50	50	50	50	50	50
Zero voltage switching	0	Yes	Yes	Yes	Yes	Yes	Yes
Dv/Dt @ V_OUT(max.)	Vus	750	750	1000	1000	500	500
Commutating Dv/Dt Snubbed for Power Factor.=	0	.5	.5	.5	.5	.5	.5
I²T Fusing (8.3 ms.)	A²S	35	260	1035	3745	1035	3745
Thermal resistance R_0JC(Tj=115^oC)	⁰C/W	1.48	1.05	.65	.30	.65	.65

General Characteristics:
Dielectric strength (Input-Output-Base)	V_RMS	4000	4000	4000	4000	4000	4000
Capacitance Input to Output	pf	3	3	3	3	3	3
Ambient temp. range (Operating)	⁰C	-40 to +100	-40 to +100	-40 to +100	-40 to +100	-40 to +100	-40 to +100

RS Family:

Features: Optically isolated Wide control range High surge ratings Compatible with most logic systems 2500 volt isolation 100% tested at rated current Fast switching times

Input:	Units	RSDC- DC-108-000	RSDC- DC-112-000	RSDC- DC-120-000	RSDC- DC-140-000
Turn-on Voltage (Min.)	VDC	4	4	4	4
Turn-off Voltage (Max.)	VDC	1	1	1	1
Current required (Max.)	mA	15	15	15	15

Output:
I_OUT(Continuous w/proper heatsink)	A_RMS	8	12	20	40
Voltage Drop @ I_OUT	VDC	2	2	3	3
I_SURGE- Non-repetitive	A_PEAK	20	30	60	120
Voltage Range (V_OUT)	VDC	0-100	0-100	0-100	0-100
Leakage @ V_OUT@ 50^oC (Max)	uA	100	100	100	100
Turn-on (max.)	us	100	100	100	100
Turn-off (max.)	us	100	100	100	100
On-State Resistance (Max.) @ I _OUT	Ohm	.18	.18	.15	.085
Thermal resistance R_0JC(Tj=115^oC)	⁰C/W	1.8	1.06	.97	.79

General Characteristics:
Dielectric strength (Input-Output-Base)	V_RMS	2500	2500	2500	2500
Capacitance Input to Output	pf	8	8	8	8
Ambient temp. range (Operating)	⁰C	-40 to +100	-40 to +100	-40 to +100	-40 to +100

I/O Modules & Accessories:

Home | Products | Contact Info

Last revised: Mar 2004

Solid State Relays

Carlo Gavazzi Solid State Relays

To Carlo Gavazzi SSR page

Continental Industries International

SSRs - I/O Modules - Accessories

Solid State Relay - SS Family :

Application Note: High Amperage Applications. It is recommended to use SV series for New Applications

Features:

SV Family (New):

Application Note: Recommended for all new applications. Now available with Superior Surge Survival™

Features:

RS Family:

Features:

I/O Modules & Accessories: